1470nm 40km 10Gbps LC CWDM Singlemode Fiber Optical SFP Transceiver
for multimode fiber, with black or beige extraction lever
SX - 850 nm, for a maximum of 550 m at 1.25 Gbit/s (gigabit Ethernet) or 150m at 4.25 Gbit/s
for singlemode fiber, with blue extraction lever
LX - 1310 nm, for distances up to 10 km
EX - 1310 nm, for distances up to 40 km
ZX - 1550 nm, for distances up to 80 km, with green extraction lever (see GLC-ZX-SM1)
EZX - 1550 nm, for distances up to 160 km
BX - 1490 nm/1310 nm, Single Fiber Bi-Directional Gigabit SFP Transceivers, paired as BS-U and BS-D for Uplink and Downlink respectively, also for distances up to 10 km. Variations of bidirectional SFPs are also manufactured which use 1550 nm in one direction. 1550 nm 40 km (XD), 80 km (ZX), 120 km (EX or EZX) SFSW – Single Fiber Single Wavelength transceivers, for bi-directional traffic on a single fiber. Coupled
with CWDM, these double the traffic density of fiber links. CWDM and DWDM transceivers at various wavelengths achieving various maximum distances.
for copper twisted pair cabling
1000BASE-T - these modules incorporate significant interface circuitry and can only be used for gigabit
Ethernet, as that is the interface they implement.
• Switch to Switch Interface.
• Gigabit Ethernet.
• Switched Backplane Applications.
• Router/Server Interface.
• Other Optical Links.
• Up to 1.25Gb/s data links.
• DFB laser transmitter and PIN photo-detector.
• Up to 80km on 9/125µm SMF.
• Hot-pluggable SFP footprint.
• Duplex LC/UPC type pluggable optical interface.
• Low power dissipation.
• Metal enclosure, for lower EMI.
• RoHS compliant and lead-free.
• Single +3.3V power supply.
• Support Digital Diagnostic Monitoring interface.
• Compliant with SFF-8472.
• Case operating temperature: 0°C to +70°.
|Wavelength||xx||Clasp Color Code||Wavelength||xx||Clasp Color Code|
|1270 nm||27||Gray||1450 nm||45||Brown|
|1290 nm||29||Gray||1470 nm||47||Gray|
|1310 nm||31||Gray||1490 nm||49||Purple|
|1330 nm||33||Purple||1510 nm||51||Blue|
|1350 nm||35||Blue||1530 nm||53||Green|
|1370 nm||37||Green||1550 nm||55||Yellow|
|1390 nm||39||Yellow||1570 nm||57||Orange|
|1410 nm||41||Orange||1590 nm||59||Red|
|1430 nm||43||Red||1610 nm||61||Brown|
|1||VEET||Transmitter Ground (Common with Receiver Ground)||1|
|2||TFAULT||Transmitter Fault.|| |
|3||TDIS||Transmitter Disable. Laser output disabled on high or open.||2|
|4||MOD_DEF(2)||Module Definition 2. Data line for Serial ID.||3|
|5||MOD_DEF(1)||Module Definition 1. Clock line for Serial ID.||3|
|6||MOD_DEF(0)||Module Definition 0. Grounded within the module.||3|
|7||Rate Select||No connection required||4|
|8||LOS||Loss of Signal indication. Logic 0 indicates normal operation.||5|
|9||VEER||Receiver Ground (Common with Transmitter Ground)||1|
|10||VEER||Receiver Ground (Common with Transmitter Ground)||1|
|11||VEER||Receiver Ground (Common with Transmitter Ground)||1|
|12||RD-||Receiver Inverted DATA out. AC Coupled|| |
|13||RD+||Receiver Non-inverted DATA out. AC Coupled|| |
|14||VEER||Receiver Ground (Common with Transmitter Ground)||1|
|15||VCCR||Receiver Power Supply|| |
|16||VCCT||Transmitter Power Supply|| |
|17||VEET||Transmitter Ground (Common with Receiver Ground)||1|
|18||TD+||Transmitter Non-Inverted DATA in. AC Coupled.|| |
|19||TD-||Transmitter Inverted DATA in. AC Coupled.|| |
|20||VEET||Transmitter Ground (Common with Receiver Ground)||1|
1.Circuit ground is internally isolated from chassis ground.
2.Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3.Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V.MOD_DEF (0) pulls line low to indicate module is plugged in.
4.This is an optional input used to control the receiver bandwidth for compatibility with multiple data rates (most likely Fiber Channel 1x and 2x Rates).If implemented, the input will be internally pulled down with > 30kΩ resistor.
We Offer Compatibles Service:
Hangalaxy has those Fiber Optic Transceivers in stock and ready to ship. This cable is tested for 100% functionality and guaranteed compatible for outstanding network performance. Now you have a reliable, compatible and affordable means to expand your network while maintaining its integrity. We can provide this cable in any lengths. If the length you need is not listed on our website, please feel free to contact us.
These adapters come with flange for added stability by screw-mounting the adapter to your adapter plate. Reduced flange models are also available. Adapters ship with standard plug-style dust caps.